Home
Product Catalog
HVAC and HEPA machine
Plastic Mould For Filter
Contact Us
HVAC and HEPA machine 
 
Production Code:FD-55-1000
1.Slitting machine:
Maximum passing width:1000mm
Speed:0.5-12m/min,adjustable
Power of motor:0.55kw
2.Marking Machine:
Marking height:6-60mm
Speed:20-150times/min,adjustable
3.Pleating machine:
Pleating height:8-55mm,adjustable
Pleating speed:20-120pleats/min,adjustable
Heat temperature: room temperature-200 centigrade
Power of motor:0.8kw
Heating power:4kw
4.Whole machine
Dimension: 3500x1200x1120mm
Weight:1500kg
pls refer to the following vedio:
 
 
Price: 12000usd on FOB Xingang,China basis
Production lead time: Within 60 days upon receipt of deposit.
Payment:30% deposit,balance against copy of B/L
 
These are pleated media
 
Machine Vedio
This machine is used in the pleating and gluing of fibre glass filter media, polyester spun bonded non-woven filter media and so on, to produce high efficiency air filters. Easy operation and high efficiency.
1. Max. width of filter: 700mm
2. Pleating height: 16 - 100mm adjustable
3. Pleating and gluing speed: Adjustable 0 - 80/min
4. Pitch of gluing: 25mm
5. Power of motor: 8KW    380V
6. Machine weight: 900KG
7. Machine Dimension: 8000 x 1050 x 1500mm
8. Speed adjustable motor
Price: 23000usd on FOB Xingang,China basis
Production lead time: Within 60 days upon receipt of deposit.
Payment:30% deposit,balance against copy of B/L
 
this is pleated result
 
 
Specification

1.       Max. Width: 300mm

2.       Max coil diameter: 1000mm

3.       Customize the rollers according to the pleating height and pitch of waves.

4.       Speed:20 sheets/min(length:500mm)

5.       Motor power:0.75kw

6.       Power supply: 380V/50Hz

7.       Working air pressure: 0.6MPa

8.       Machine weight: 600kg

9.       Machine size: 3400x510x1600mm (L x W x H)

Features

1.       The roller speed can be controlled through variable-speed motor to accommodate different working conditions.

2.       The length of pleated aluminum is adjustable by setting, be cut off automatically.

3.       It is equipped with the aluminum edge-doubled device while corrugating. Which prevent the fiber glass from breaking.

Use the gathering cylinder to collect products into the container
 
Specification

1.       Machine Height: 24000

This machine could produce for type : 60*4  196*4 130*4  260*4 (B*A), any of two type produced same time
 

Home  |  Product Catalog  |  HVAC and HEPA machine  |  Plastic Mould For Filter  |  Contact Us  |  Sitemap

冀ICP备09027780号
Email/MSN:jianjun_d@hotmail.com or sales@filtermakingmachine.com Tel:+86-312-2135687   Fax:+86-312-2132181  
冀ICP备09027780号
Powered by DIYTrade.com